sprayed coating

Study on Thermal Fatigue Fracture Characteristics of Thermally Sprayed Coating on Wheel Cast Steel

铸钢车轮材料热喷涂层热疲劳试验断口特征分析

Microstructure evolution and bonding mechanism of thermal sprayed Ni-Al coating during reactive sintering

Ni-Al喷涂层反应烧结的组织演变与结合机制

The coating is sprayed onto the specimen, air-dried to a soft powder.

这种涂料喷涂到试件上去并在空气中干燥之后,即成为松软的粉末.

Investigation of Thermocompression Post Treatment of Al 2O 3 Thermal Sprayed Coating

Al2O3热喷涂层热压后处理问题解析

Tribological Properties of Plasma-sprayed Coating Al_2O_3 and Al_2O_3+ 13% TiO_2 under Water-lubricated Condition

水润滑下Al2O3、Al2O3+13%TiO2等离子喷涂层的摩擦磨损特性

The results show that the sprayed FeS coating possesses the remarkable properties of anti-friction and wear-resistance.

结果表明，固体润滑硫化亚铁喷涂层具有优异的减摩、耐磨性能。

Coatings of thermal sprayed welding, WC and Cr-WC particles distributed in the Ni-based alloy by the embedded ways. Binding state of Coating and matrix was metallurgy.

在热喷焊涂层中，WC和Cr-WC粒子呈嵌入式分布在Ni基合金中，涂层与基体的结合状态为冶金结合，表面形貌来看，涂层表面比较粗糙，大颗粒的WC粒子很清晰。

Selecting for Best Evolution of Interface Microstructure in Thermal Sprayed Ni-Al Coating during Reactive Sintering

Ni-Al喷涂层反应烧结时界面结构的择优演变

Experimental Study and FEM Analysis for Bond Strength of Thermal Sprayed Coating

涂层结合强度的试验研究及有限元分析

Study on the Characteristics of Composition Distribution at the Interface of Thermally Sprayed Ni-Al Coating Formed by Reactive Sintering at Median Temperature

Ni-Al涂层中温反应烧结界面成分分布特性的研究

Arc sprayed aluminium composite coating increaseservice life of reaction caldron up to the design life.

采用电弧喷涂铝复合涂层来解决反应釜的腐蚀问题,可使其达到或超过设计寿命.

The results showed that plasma sprayed Ni-3% Al powder would damage the PMC substrate and was not suitable for bonding ceramic coating on PMC substrate.

结果表明，等离子喷涂Ni-3%Al粉末会对PMC基体造成破坏，不适合于作为PMC基体上的打底材料。